Warning: A non-numeric value encountered in /homepages/22/d26133573/htdocs/wordpress/wp-content/plugins/ultimate-social-media-plus/ultimate_social_media_icons.php on line 604
Series MDR
• side operation • low profile • with through-hole thread
Technical dataand dimensions [mm]: length dimensions according to DIN ISO 2768 mH
MDR Size | nominal clamping force [kN] | thread D* | max. actuation torque [Nm] | T-Nut A | max. static load [kN] | weigth approx. [kg] | Ø a | Ø d1 | Ød2 | e | L | t |
---|---|---|---|---|---|---|---|---|---|---|---|---|
120 | 120 | M 16 | 85 | 18 | 130 | 2,2 | 90 | 44 | 86 | 17,5 | 60 | 30 |
120 | 120 | M 20 | 90 | 22 | 200 | 2,2 | 90 | 44 | 86 | 17,5 | 60 | 30 |
120 | 120 | M 24 | 95 | 28 | 240 | 2,2 | 90 | 44 | 86 | 17,5 | 60 | 30 |
120 | 120 | M 30 | 105 | 36 | 240 | 2,2 | 90 | 44 | 86 | 17,5 | 60 | 30 |
*property class of threaded bolt up to M24 min. Q 10.9; from M30 Q 8.8 (further thread sizes i.e. inches on request)
max. allowed temperature range: -30°C up to +200°C
Series MDR-F
• with disk spring package • higher operational safety through clamping stroke compensation
Technical data and dimensions [mm]: length dimensions according to DIN ISO 2768 mH
MDR-F Size | nominal clamping force [kN] | technical data analogous to MDR | spring clamping stroke at FN [Nm] | weight approx. [kg] | Ø b | Ø d1 | Ø d2 | L | t | W |
---|---|---|---|---|---|---|---|---|---|---|
120 | 120 | see above | 1,0 | 3,6 | 92 | 35 | 88 | 90 | 61 | 10 |
ordering example:
clamping nut MDR 120 – M 30 clamping nut MDR-F 120 – M 24