Home > Drive Technology > Servo Couplings > Miniature Couplings
Miniature Couplings
- compact and high power density
- torques up to 20 Nm
- offset compensating
- temperatures from -40°C to +300°C
- torsionally rigid miniature metal bellows couplings
- vibration-damping miniature elastomer couplings
- highly compensating miniature cross slide couplings
MKM - Miniature Metal Bellows Coupling
- standard series
- with clamping hubs on both sides
- backlash-free – high torsional rigidity
- temperature range: -40°C to +200°C
- torque range: 0.4 – 12 Nm
- shaft diameter: 3 – 24 mm
MKP - Miniature Metal Bellows Coupling
- short overall length
- with clamping hubs on both sides
- backlash-free – high torsional rigidity
- temperature range: -40°C to +200°C
- torque range: 2 – 12 Nm
- shaft diameter: 3 – 24 mm
MKA - Miniature Metal Bellows Coupling
- low-cost version
- with set screws on both sides
- backlash-free – high torsional rigidity
- temperature range: -20°C to +90°C
- torque range: 0.4 – 8 Nm
- shaft diameter: 3 – 26 mm
MKG - Miniature Metal Bellows Coupling
- welded version
- with clamping hubs on both sides
- optionally with easy-to-install EASY clamping hubs
- backlash-free – high torsional rigidity
- variable overall length – 2-, 4- or 6-corrugated bellows
- temperature range: -40°C to +300°C
- torque range: 5 – 20 Nm
- shaft diameter: 6 – 20 mm
MJT-C - Miniature Elastomer Coupling
- standard version
- with clamping hubs on both sides
- pluggable – backlash-free – vibration-damping
- temperature range: -20°C to +70°C
- torque range: 0.7 – 12.5 Nm
- shaft diameter: 3 – 14 mm
Do you need help with the selection?
With the coupling finder from JAKOB Antriebstechnik, you can find the right coupling from our product range with just a few questions and settings
MJT - Miniature Elastomer Coupling
- low-cost version
- with set screws on both sides
- pluggable – backlash-free – vibration-damping
- temperature range -20°C to +70°C
- torque range: 0.7 – 12.5 Nm
- shaft diameter: 3 – 14 mm
MOH-C - Miniature Cross Slide Coupling
- standard version
- with clamping hubs on both sides
- pluggable – highly compensating – lateral offset up to 3 mm
- temperature range: -20°C to +100°C
- torque range: 1 – 15 Nm
- shaft diameter: 3 – 19 mm
